Recommendation – Print Settings

Optimized for FDM printing (PLA / PLA+ / ePLA silk)
– Layer height: 0.2 mm
– Nozzle: 0.4 mm
– Wall line count: 3
– Top layers: 4
– Bottom layers: 4
– Infill: 15% – Grid or Cubic
– Cooling: 100% fan after layer 5
– Support: Not needed (unless custom variant)
– Recommended filament: PLA matte or silky for visual impact

Optional: print slower on outer walls (30–40 mm/s) for better logo relief precision.